OPERATING THE MACHINE
5-9
ENGINE SPEED CONTROL
Increase and decrease the engine speed using engine control
dial (1) located on the right console, as illustrated.
• Turn engine control dial (1) clockwise to increase
the engine speed. Turn engine control dial (1)
counterclockwise to decrease the engine speed.
• Note that the auto-idle function will be deactivated if
engine control dial (1) is operated while the engine is
running at the auto-idle setting.
• Before stopping the engine, always turn engine control
dial (1) counterclockwise to the stop (to the slow idle
setting). Run the engine five minutes to cool the engine.
Then, turn key switch to OFF position to stop the engine.
1
M1U1-01-033
1
M1V1-01-001
Slow Idle
High Idle
To Next Page
Loading...
Need help?
General
