OPERATOR'S STATION
1-142
Audio Input
IMPORTANT: This function is available only to a machine
equipped with an audio input. Use this function with
proper sound volume.
Audio Input Selection
Push AM/FM Switch (1) to display AM and FM screen as well
as AUX screen on digital display (3).
Connecting audio device
By removing AUX IN Cap (4), the audio input terminal
appears.
Connect your audio device to the audio input terminal of
the machine with your audio cable.
IMPORTANT: Use Φ3.5 mm stereo plug for the connection
of audio input terminal.
IMPORTANT: Put AUX IN cap (4) when the audio input is
not in use.
Volume Control of audio device
Turn the volume down to the minimum beforehand, and
then push volume control switch (2) to adjust the volume.
IMPORTANT: If volume control on the audio device
has been set to the maximum, you will hear an
overwhelming sound; so set the volume control to the
minimum first. If the sound is too low even volume
control switch (2) is pushed to the maximum, adjust
the volume control on the audio device to increase the
volume.
IMPORTANT: Operate your audio device to play or stop
the sound.
MNEC-01-535
21
3
4
MNEC-01-537
To Next Page
Loading...
Need help?
General
