SAFETY
S-23
Transport Safely
Be aware care that the machine may turn over when
loading or unloading the machine onto or off of a truck or
trailer.
Observe the related regulations and rules for safe
transportation.
Select an appropriate truck or trailer for the machine to
be transported.
Be sure to use a signal person.
Always follow the following precautions for loading or
unloading:
1. Select solid and level ground.
2. Always use a ramp or deck strong enough to support the
machine weight.
3. Use the low speed gear.
4. Never steer the machine while on the ramp. If the
traveling direction must be changed while on the ramp,
unload the machine from the ramp, reposition the
machine on the ground, then try loading again.
5. After loading, install the lock bar to securely hold the
articulation mechanism.
6. Wedge the front and rear of tires. Securely hold the
machine to the truck or trailer deck with wire ropes.
Be sure to further follow the details described in the
TRANSPORTING chapter.
Less than 15 °
SA-454
To Next Page
Loading...
Need help?
General
