STARTING TO DRIVE
1.
Push down the clutch pedal and start the engine.
2.
Select the the speed range (A or B) and suitable gear.
Rememeber to select a gear low enough to manage the
start.
3.
If you start to drive on a slope, push down the brake
pedals to keep the tractor stopped.
4.
Move the power shuttle lever to the forward or reverse
position.
5.
Release the clutch pedal.
6.
Adjust the driving speed with the accelerator pedal and
change gears when necessary (see next page)
1
4
5
2 6
3
10
To Next Page
Loading...