1.
6 main gears
2.
2 group gears. Lever in front position equals high (B) gears
and lever in rear position equals low (A) gears
3.
Creeper gear.
Lever (A74-A94) in lower position equals creeper ON. In A104-
A134 use the rocker switch. Tortoise down means creeper ON.
Always use clutch pedal and stop the tractor before
engaging / disengaging the creeper.
CHANGING THE GEARS
In A4 series tractor you have 6 main gears and 2 range
gears. Optionally you can have also super creeper gears
which are used for very low speeds.
1
2
3
3
11
To Next Page
Loading...