1.
Push down the clutch pedal and start the engine.
2.
Select the right PTO speed from
right hand console (A104-A134) or external lever (A74-A94).
3.
Turn on PTO with a switch on right console
4.
Set the speed you need with hand trottle or accelerator pedal,
PTO speed can be read in instrument panel.
5.
Save engine revs into engine RPM memory
6.
Set hand throttle to minimum (a Tip below)
7.
Select the right gear and start working
Tip You can control your engine revs between idle and
working just with RPM memory button since you have set it.
PTO
WORK
2
1
3
2
4
5
18
To Next Page
Loading...