HLU HF R 48 R Series - Interfaces of the Fan; Safety Measures (to be Implemented by the User); Users Responsibilities

19
www.hlu.eu
06.2019
Deactivating the safety devices, or changing their operating principle,
is strictly prohibited.
4.5 Safety measures (to be implemented by the user)
4.4 Interfaces of the fan
The fan has the following interfaces:
J Outlet side (connection via sleeve with tightening strap or ange)
J Terminal box or maintenance switch (electric supply)
J Inlet side (connection via sleeve with tightening strap or ange)
We point out that the user is under the duty to:
J instruct the operating and maintenance personnel on the protective devices of the fan,
J and to ensure supervision concerning compliance with the safety measures.
This operating manual must be kept for future use. The specied frequency of inspection and
control measures must be met.
J The chapters related to transport, installation and mounting, maintenance, troubles/causes/
troubleshooting must be understood by a qualied person. Work described in this chapter
may be performed only by qualied personnel.
4.6 User‘s responsibilities
In the European Economic Area, compliance with Council Directive
(89/391/EEC) and the related individual directives, especially Council
Directive 89/655/EEC Concerning the Minimum Safety and Health
Requirements for the Use of Work Equipment by Workers at Work in
the relevant national version is mandatory.
The user must obtain the local operating licence and follow the relevant rules.
Additionally, the user must ensure compliance with the national legal regulations concerning
J the personnel safety (regulations relating to accident prevention)
J the safety of work equipment (protective equipment and maintenance)
J product recycling (Waste Management Law)
J material disposal (Waste Management Law)
J cleaning (cleaning agents and disposal)
J and comply with the requirements for environment protection.
Operating manual
Centrifugal fans
HF R | RV | MRV