4
06.2019
1.2 EC-/EU-Declaration of Conformity
www.hlu.eu
EC-/EU-
Declaration of Conformity
Page 1 of 2Konformitätserklärung
Name and address of the persons, who are authorized, to assort the technical documents:
J Anne-Christin Vögl-Schmitt, Hürner Luft- und Umwelttechnik GmbH, Ernst-Hürner-Straße,
35325 Mücke-Atzenhain, Germany
J Marcel Pfeifer, HLU Systemtechnik GmbH, Sälzerstraße 20a, 56235 Ransbach-Baumbach, Germany
precluding responsibility for components provided or mounted by the customer. It the fan is modied without prior
agreement with HLU, this declaration is void.
Directive / Standard Title
DIN EN ISO 12100:2011
Safety of machinery - General principles for design – Risk assessment and
risk reduction
Reference to the following standards is made additionally in the DIN EN ISO 12100:
DIN EN ISO 13857:2008, DIN EN 349:2009, DIN EN ISO 14120:2016, DIN EN ISO 13732-1:2008,
DIN EN 60204-1:2014
DIN ISO 21940-11:2017 Procedures and tolerances for rotors with rigid behaviour
DIN EN 61000-6-4:2011
Electromagnetic compatibility, Generic standards - Immunity for industrial en-
vironments
DIN EN 61000-6-2:2011
Electromagnetic compatibility, Generic standards; Emission standard for indus-
trial environments
DIN EN 82079-1:2013 Preparation of instructions - Structuring, content and presentation
VDMA 24167:1994 Fans - Safety requirements
For the purpose of
J EC Machine Directive 2006/42/EC, Annex II A for Machines
J EC Low Voltage Directive 2014/35/EU, Annex III
J EMC Directive 2014/30/EU, Annex I and II
We hereby declare that the construction type of the supplied version of:
HF R …, HF D …, HF A …, AX 58 …, RV …, MRV …, SDR …
Manufacturer: Hürner Luft- und Umwelttechnik GmbH
Ernst-Hürner-Straße
35325 Mücke-Atzenhain
Germany
HLU Systemtechnik GmbH
Sälzerstraße 20a
56235 Ransbach-Baumbach
Germany
in the delivered version, as a separate component within an installation, complies with the above regulations and
the following standards or normative documents:
Operating manual
Centrifugal fans
HF R | RV | MRV
www.hlu.eu