Need help?Do you have a question about the Hobart 2912 Slicer and is the answer not in the manual?
General| Model | 2912 |
|---|---|
| Type | Slicer |
| Brand | Hobart |
| Blade Diameter | 12 inches |
| Voltage | 115 V |
| Material | Stainless steel |
| Slicing Thickness | 0 to 0.75 inches |
Lists the key standard features of the Hobart 2912 Slicer.
Details the specific model and available accessories for the slicer.
Provides comprehensive technical specifications and features of the slicer.
Covers unpacking, checking for damage, and initial electrical setup.
Instructions for assembling key components like the carriage, sharpener, and covers.
Important safety warning regarding proper grounding of electrical connections.
Guidelines for ensuring safe operation by maintaining safety devices and proper usage.
Step-by-step instructions for slicing with Models 2812 and 2912.
Recommended steps for daily cleaning and sanitizing of the slicer.
Specific guidance on cleaning individual parts like the carriage, sharpener, and covers.
How to use cleaning legs or lift levers for easier access during cleaning.
Procedure for sharpening the slicer's knife to maintain performance.
Instructions for lubricating the carriage slide rod for smooth operation.
Information on contacting authorized service for repairs and adjustments.
A guide to diagnosing and resolving common problems with the slicer.
Schematic showing the electrical layout and components of the slicer.
Detailed wiring and connection diagram for the slicer's electrical system.
A comprehensive list of replacement parts for the Model 2000 Series slicers.
Exploded views and part numbers for various assemblies of the slicer.
Diagrams and part numbers for different wiring harnesses used in the slicer.
To Next Page
