Hobart H600 Installation And Operation Manual

4
Table 1. Technical information.
Description Units H600 H800
Motor power kW (hp) 1.5 (2.0) 1.5 (2.0)
Maximum speed of rotating part (50Hz) rpm 1425 1425
Nominal electrical supply 1 ph Volts/Hz 230/50
3 ph Volts/Hz 400/50 400/50
Full load current at above voltage 1 ph Amps 8.8
3 ph Amps 3.4 3.4
Recommended fuse size 230v/1 ph/50hz
amps
25
Recommended fuse size 400v/3 ph/50hz
amps
10 10
Maximum ambient temperature
o
C40 40
Attachment hub drive size -- Number 12 Number 12
Mixer weight including agitator and bowl
(empty)
Kg (Lbs) 328 (723) 344 (758)
Noise level dB (A)
##
less than
70
##
less than
70
Maximum Capacity Litres 57.5 78.5
Shipping weight kg (Lbs) 358 (790) 374 (824)
Shipping dimensions (carton)
LxWxH
cm
117x86x158 117x86x158
Storage conditions. Temperature and humidity.
o
C,
% RH
+5 to +38,
85
+5 to +38,
85
Class of appliance
#
Class I
#
Class I
Enclosure IP rating IP45 IP45
Wiring terminal size; single phase/3 phase mm
2
1.5/1.0 1.5/1.0
#
Refer to section 4.3.
##
In accordance with EN-ISO 12001:1996.
FIGURE 1. OVERALL DIMENSIONS.

Hobart H600 Specifications

General

Capacity	60 quarts
Transmission	Gear-driven
Manufacturer	Hobart
Category	Mixer
Type	Floor Mixer
Voltage	208-240V