MODEL H600/P660/L800 GENERAL
F12536 (Rev. A, December 2005) Page 4 of 88
GENERAL
INTRODUCTION
The Hobart H600, and L800 mixers are designed primarily to mix food products; however, they are often used for
various industrial applications. A standard attachment hub provides versatility of operations through use of optional
attachments and accessories.
On H600 and L800 mixers, the attachment hub and planetary shaft are driven by the four speed transmission.
The model L800TH (Tim Horton's) varies from the standard L800 slightly. The differences are listed below.
• The mixer comes with a bolt on bowl adapter set up to
accept only 60 quart bowls and accessories.
• A shield mounted on the inside of the pedestal
protects wiring from the fan blades.
• The motor has a cooling fan mounted on the motor shaft. • Usage of an enhanced overload relay that can
be identified by a red reset button. The
standard L800 has a green button.
• It is built as a 200V/60Hz/3Ph only.
A timer and brake are available as an option on the H600, but are standard equipment on the L800.
The Hobart P660 is a heavy duty mixer available as a single or two speed mixer. Standard equipment on the P660
includes a #12 attachment hub and a 15 minute timer.
A manual bowl lift is standard on H600/L800/P660 mixers. A power bowl lift was available as an option on H600
and L800 mixers only.
SPECIFICATIONS
ELECTRICAL SPECIFICATIONS / MOTOR RATINGS
Voltage/Hz./Phase
H600 L800 P660
Horsepower Horsepower Horsepower
115/60/1 1, 1-1/2, 2 - - - - - -
200/60/1 1-1/2, 2 1-1/2, 2 - - -
208/60/1 - - - 1-1/2 2-1/2
230/60/1 1 1/2, 2 1-1/2, 2 - - -
240/60/1 - - - - - - 2-1/2
200-230/60/1 1 - - - - - -
200/60/3 1-1/2, 2 2 - - -
208/60/3 - - - 2 - - -
220/60/3 - - - 3/4 - - -
230/60/3 1-1/2, 2 2 - - -
440/60/3 - - - 3/4 - - -
460/60/3 1/2, 1, 1-1/2, 2 1-1/2, 2 - - -
550/60/3 - - - 1-1/2 - - -
200-208/60/3 - - - 1-1/2 - - -
200-230/60/3 3/4, 1 - - - - - -
208-240/60/3 - - - - - - 2-1/2
220-230/60/3 - - - 1-1/2 - - -
380-400/60/3 1 - - - - - -
380-440/60/3 - - - 1-1/2 - - -
550-575/60/3 1 - - - - - -
To Next Page
Loading...
Need help?
General
