BA-21870-001-GB 08.10.2010 21
GB
Attention:
The machine has to be switched off.
! Open the door.
If the door is closed, or if no button is pressed for 15 seconds, the
indicator automatically switches off and the new settings will be saved.
Therefore, the setting procedure described below can be interrupted at
any time.
9.1. ADJUSTMENT OF DETERGENT DOSAGE
QUANTITY
! Push Stop button
➃
and Program button
➁
simultaneously until
• the upper display
➅
shows “CH1” and
• the lower display
➄
shows e.g.
“2.50” pre-adjusted value of the detergent dosage
= 2.50 g/l.
! To adjust the detergent dosage, push the ON/OFF button
➀
repeat-
edly, until the desired value (0.00 - 9.50 g/l) appears.
NOTE: Adjustment should be done in accordance with chemical sup-
plier’s recommendations.
PREMAX MODELS UP/UPT:
The dosage amount for the detergent direct injection cannot be changed.
9.2. ADJUSTMENT OF RINSE AID DOSAGE QUAN-
TITY
! Push Program button
➁
again.
• The upper display
➅
shows “CH2“.
• The lower display
➄
shows E.g.:
“0.30“ = pre-adjusted value of the rinse aid dosage time
= 0.30 g/l.
! To adjust the rinse aid dosage, push the ON/OFF button
➀
repeat-
edly, until the desired value (0.00 - 2.00 g/l) appears.
NOTE: Adjustment should be done in accordance with chemical sup-
plier’s recommendations.
9. SETTINGS AND COUNTER VALUES
To Next Page
Loading...
