Hobart UP series - Water Hardness Adjustment; Cycle Counter Monitoring; Water Consumption Monitoring

22 08.10.2010 BA-21870-001-GB
GB
9.3. ADJUSTMENT OF WATER HARDNESS
With optional softener only.
To adjust the softener to the local water hardness (obtain details from
local water authority.
! Push Program button
➁
again until
• the upper display
➅
shows “H04“.
! Push ON/OFF button
➀
repeatedly until the desired setting (H01-
H04) appears.
• H01 = up to 9°eh
• H02 = 10 to 18°eh
• H03 = 19 to 26°eh
• H04 = 27 to 38°eh
9.4. CYCLE COUNTER
! Push Program button
➁
again.
• The display will show alternately “P” or the number of wash
cycles.
• The lower display
➄
shows the values from 1 to 999.
Thousands will be shown in the upper display
➅
.
! Example: 1023 wash cycles
! Max. Indication: 999 999
9.5. WATER CONSUMPTION COUNTER
! Push Program button
➁
again.
• The display will show alternately “E” or the water consumption
(liter).
• The lower display
➄
shows the values from 1 to 999.
Thousands will be shown in the upper display
➅
.
! Example: 10217 liter
! Max. Indication: 999 999
9. SETTINGS AND COUNTER VALUES