Need help?Do you have a question about the Hobart UP series and is the answer not in the manual?
General| Type | Undercounter |
|---|---|
| Dimensions | Varies by model |
| Weight | Varies by model |
| Booster Heater | Optional |
| Water Temperature | 140-180°F |
| Door Opening Height | Varies by model |
| Electrical Options | 208V or 240V |
| Power Supply | 208-240/60/3 (Voltage/Hz/Phase) |
Specifies the ideal placement and clearance requirements for the machine.
Details the necessary procedures and precautions for connecting the machine to the electrical supply.
Outlines the requirements for connecting the machine to the water supply.
Instructions for connecting steam supply to applicable machine models.
Describes the process of adjusting the steam shut-off valve for optimal performance.
Specifies the correct method for connecting the machine's drain system.
Details the installation of the conductivity probe for chemical sensing.
Instructions for connecting and preparing the detergent dispenser.
Instructions for connecting and preparing the rinse aid dispenser.
Details the setup and activation of the chemical deficiency sensor.
Guides on manually priming the detergent, rinse aid, and direct injection hoses.
Procedure for filling and preparing the optional water softener with salt.
Steps to prepare the machine and load washware before starting a cycle.
Describes the process of starting and monitoring a wash cycle.
Explains how to choose and change the wash program for different needs.
Detailed steps for properly shutting down the machine.
Daily cleaning procedures to maintain machine hygiene and performance.
Weekly maintenance tasks for cleaning wash and rinse arms.
Instructions for performing the hygiene cleaning cycle to ensure sanitation.
Procedure to set the correct amount of detergent dispensed per liter.
Procedure to set the correct amount of rinse aid dispensed per liter.
How to adjust the softener based on local water hardness levels.
Displays the total number of wash cycles the machine has completed.
Shows the total amount of water consumed by the machine.
Allows enabling or disabling audible signals for machine events.
How to enable or disable chemical sensors for detergent and rinse aid.
Settings to control the detergent dosage pump's operation mode.
Settings to control the rinse aid dosage pump's operation mode.
Procedure to exit setting mode and save changes.
Identifies causes and remedies for issues related to washware cleanliness.
Addresses various other operational problems and their solutions.
To Next Page
