10 08.10.2010 BA-21870-001-GB
GB
3. CONTROLS
➀
ON/OFF-button FUNCTIONS:
– Start machine: Push button.
– Start wash cycle: If the machine is ready for operation, Push button.
– Start automatic drain and self-cleaning cycle:
Push Button and hold for 3 seconds.
Thereafter, machine switches off automatically, but is not voltage free!
DISPLAYS:
The current machine mode is displayed by different colors.
GREEN = Machine is ready for operation
BLUE = Wash cycle is running
RED (permanently) = Failure indication (see section 8.)
GREEN/RED (alternating) = Failure indication (see section 8.)
The status of the program is indicated by the color change of the four button
segments.
Filling increaslingly GREEN
Draining decreaslingly GREEN
Washing from BLUE back to GREEN
Optional:
Exhaust system active circling BLUE segment, background: GREEN
➁
Program button Select between different preset programs: Push button.
Display
➅
shows the selected program number and the corresponding run
time (e.g. P02 240).
➂
Only for PREMAX models UP/UPT:
Direct ON/OFF-switching of the Intensive cycle P03.
➃
Stop button In case of operating error or faults:
Switch off machine immediately (without draining): Push button.
After switch off, the machine is not voltage free!
➄
Display e.g. temperature indication Wash (°C) (see section 7.)
➅
Display e.g. temperature indication Rinse (°C) (see section 7.)
➆
Salt required Insufficient regeneration salt in softener (if built-in)
➇
Detergent/Rinse Aid indicator Detergent or rinse aid deficiency (if chemical sensor is activated)
➈
Hygiene indicator Hygiene cleaning should be carried out (see section 6.4.).
➉
Service indicator Machine operation is faulty (see section 8.).
To Next Page
Loading...
