Hobart UP series - Running a Wash Cycle

BA-21870-001-GB 08.10.2010 15
GB
PREMAX MODEL UPT:
! GN-parts can also be placed in the guide rails of the additional
lateral wash system.
Attention:
When using the lateral wash system, please note that the wash
result is better in the center than on the outer edges.
! Racks can also be hung on the hooks of the additional lateral wash
system.
5.2. RUN
! Load machine and close the door.
! Push the ON/OFF button
➀
. During the running wash cycle, the
color of the ON/OFF button changes from blue increasingly back to
green.
Attention:
For PREMAX models UP/UPT, a soaking phase is integrated in
the cycle. During this phase, the machine is silent.
! As soon as the ON/OFF button illuminates completely green, the
wash cycle is finished.
! Open the door and take out rack. Allow washware enough time to
dry.
MACHINES WITH EXHAUST HEAT RECOVERY (OPTIONAL):
! The ON/OFF button
➀
shows a circling blue segment on a green
background as long as steam is exhausted from the machine. For
high capacity requirements, it is not necessary to wait for this pro-
cess to complete before continuing operation of the machine.
5. OPERATION