Need help?Do you have a question about the Hobart AM16 and is the answer not in the manual?
General| Model | AM16 |
|---|---|
| Category | Dishwasher |
| Type | Door Type |
| Energy Star | Yes |
| Motor Horsepower | 1 HP |
| Phase | 1 or 3 |
Procedure for checking for shipping damage and handling the machine upon delivery.
Requirements for installation according to state, local, and national electrical codes.
Guidelines for selecting the dishwasher's operating location and required clearances.
Instructions for installing the dishwasher in a corner configuration, including clearances and rack guide repositioning.
Details on recommended water quality, hardness, and chloride levels for optimal performance.
Instructions for connecting the water supply, including pressure and temperature requirements.
Method for calculating required airflow for dishwashing appliance exhaust hoods.
Procedure for adjusting voltage settings for specific machine models, to be performed by a qualified electrician.
Instructions for verifying and correcting wash pump motor rotation direction before use.
Explanation of the vent fan control feature and its operation on non-ventless models.
Guidance on installing Hobart-supplied chemical pumps and dispensers on AM16 models.
Procedures for programming chemical dispensing modules, including setting concentrations and priming.
Instructions for installing tubing for detergent and rinse aid dispensers not provided by Hobart.
Details on the locations for installing detergent feeder tubes and sensors within the dishwasher tank.
Instructions for removing plugs and installing the rinse aid dispenser tube on standard and tall units.
Steps for preparing the dishwasher, including ensuring the standpipe and strainer basket are correctly placed.
Steps for thoroughly cleaning the dishwasher interior, strainer, and wash arms at the end of each shift.
Steps for manually initiating and performing a delime cycle when prompted by the machine.
Procedures for performing automatic delime cycles on specific AM16 models, including chemical addition.
Steps to register an account and connect the AM16 dishwasher to the SmartConnect app via WiFi.
Instructions for checking the rotation and cleaning of the wash and rinse arms.
Information on lubrication maintenance for pump and fan motors, stating no maintenance is required.
Guidance on inspecting chemical tubes for built-in Hobart pumps every six months.
Procedure for cleaning internal baffles located on the back wall of specific AM16 models.
A comprehensive list of error codes, their on-screen text, descriptions, and troubleshooting steps.
A list of expendable parts for AM16 dishwashers, including part numbers, descriptions, and machine types.
To Next Page
