Hobart AUXXT Series - User Manual

Questions and Answers

R
Richard ThomasAug 7, 2025
How to fix Hobart AUXXT Dishwasher when dishes are not clean?
- M
  Melinda MooreAug 7, 2025
  If your Hobart Dishwasher leaves dishes unclean, several factors could be at play. Start by checking if the wash arms are stiff; they should turn easily by hand. Remove and thoroughly clean them, ensuring the water outlet to the wash arms is clear. Inspect the wash arm nozzles for clogs, removing the cleaning cap and rinsing until all soil is gone, then replace correctly. Also, check if the coarse strainer is soiled and needs cleaning, or if the fine strainer is obstructed, requiring soaking in a vinegar solution followed by thorough cleaning. Ensure the detergent concentration is correct and that you've selected a program suitable for the level of soiling. Selecting a program with a longer wash cycle may also help.
B
brooksjefferyAug 12, 2025
How to improve drying in my Hobart AUXXT?
- H
  Heather YoungAug 13, 2025
  If your Hobart Dishwasher isn't drying dishes or glasses properly, start by increasing the rinse aid concentration, referring to the operating instructions for guidance. Ensure that the detergent concentration is adequate and appropriate for the load. Drain soiled water and refill the machine, and review your pre-scrapping procedure. Use appropriate racks to create a sloping position that allows water to drain away from cavities. To help with drying, take out the dishes as soon as the cycle is completed.
J
james85Aug 17, 2025
What to do if my Hobart AUXXT Dishwasher stops mid-cycle?
- M
  Mark BarrettAug 17, 2025
  If your Hobart Dishwasher suddenly stops during a wash program, check the site fuses to ensure they haven't blown. Also, consider whether the machine is connected to a "maximum power supply unit" that might be cutting out, or if it's interlocked with another energy-consuming unit. If so, have an electrician connect the machine separately.
J
Joseph SellersAug 22, 2025
Why does my Hobart Dishwasher leave stripes and stains on dishes?
- S
  Sierra BushAug 22, 2025
  To address streaks and stains on dishes or glasses from your Hobart Dishwasher, first, adjust the rinse aid concentration according to the instructions. If you have hard water or high mineral content, check your water quality and consult your local water authority for details. The ideal degree of hardness is 4° Clark, with a conductivity value of max. 150 µS/cm for glasses and max. 400 µS/cm for dishes. Ensure you are using appropriate racks to create a sloping position for proper water drainage. For machines with a softener, use only granular salt. If stains persist, increase the rinse aid concentration.
G
Gregory NelsonAug 27, 2025
Why are glasses breaking in my Hobart AUXXT?
- W
  williamsrussellAug 27, 2025
  Glass breakages in your Hobart Dishwasher can often be attributed to using inappropriate dish or glass racks; ensure you are using the correct racks for your items. If you have an AUXXT model, high-pressure cleaning may have been activated; avoid using this setting for glasses and light dishes.
H
hamiltonisabellaSep 1, 2025
What causes cloudy glasses in my Hobart AUXXT?
- W
  william21Sep 1, 2025
  The cloudiness on glasses washed in your Hobart Dishwasher is due to glass corrosion, where the surface of the glasses becomes rough and porous. This issue isn't caused by a malfunction of the machine. The solution is to replace the affected glasses.