Trim out the EPP foam from
the motor cowling.
As shown in the picture install
the wheels and wheel covers, the
epp foam sheet for the
undercarriage legs can be glued on
using medium CA or foam glue.
Fit the propeller and spinner
as shown, ( a propeller must be
pu
rchased separately).
Fit the cowling as shown, slot
the ply locaters into the fuselage and
ensure
it is firmly pushed home.
Install the motor speed
co
ntroller in the position shown.
Install the elevator pushrod as
sh
own in the picture.
To Next Page
Loading...
