6
Installing Cam Cleats and Blocks
4
Mount the Hobie Cheek
Block on the top of the
Aka bar directly behind
the Snuffer Sock using the
provided 1’’ and 1.5’’ self-
drilling screws. The Cheek
Block should be oriented so
that the side with the pulley
is closest to the cockpit.
(FIG 6)
Use the provided 8-32
screws to mount the Har-
ken Cam Cleat to the front
cross bar in the tapped
holes next to the other two
Harken Cam Cleats. (FIG 7)
FIG 6
FIG 7
To Next Page
Loading...
