Need help?Do you have a question about the Hobie Island and is the answer not in the manual?
Attaching the snuffer hoop and bag to the aka bar.
Connecting the bow traveler pulley assembly to the kayak bow.
Installing the tell tale post assembly and mast tip rotator.
Mounting Hobie Cheek Block and Harken Cam Cleat.
Drilling and bolting the swivel cam cleat mount to the kayak stern.
Securing the swivel cam cleat mount and cleat to the rear aka bar.
Feeding the halyard line through sail grommets and terminating with a knot.
Routing the halyard line through the snuffer sock and various blocks.
Feeding the halyard line through bow traveler and stern pulleys.
Feeding line through mast tip rotator, hoisting, and terminating the halyard.
Folding and feeding the spinnaker sheet line through the sail clew and cleats.
Attaching eyelet posts to the rear aka bars and optional pad eyes.
Best practices for using the spinnaker in various wind conditions.
Important safety guidelines for operating the spinnaker.
To Next Page
General
