Hobie iTrek User Manual

12
Seat
1
2
There are two con-
nection points on the
kayak to secure the
seat.
Connect the rear seat
bottom frame into the
seat holders on the
back of the kayak.
Push down on the seat
until it snaps into the
holders.
Secure by stretching
the shock cord over
the seat bottom frame
and looping the shock
cord around the hook
built into the seat
holder.
Connect the hooks
on the left and right
straps that hang o
the front of the seat
to the D-Rings on the
kayak.
Pull the Left and Right
straps tight to secure
the seat in place.
1
2
Installation

Hobie iTrek Specifications

General

Type	Inflatable Kayak
Width	36 inches
Material	PVC
Hull Material	PVC
Seat Type	Inflatable
Storage	Bow storage