Hobie iTrek User Manual

25
hobie.com
Kick Up Adjustment
Kick-Up Fin Adjustment
If the ns do not stay locked
into position and feel loose,
you’ll need to adjust the kick-
up set screw.
1
2
3
Tighten the screw 1/4 turn
at a time until the set screw
just touches the n.
Test the n by moving it
in and out of the kick-up
position to determine if it
needs to be tightened or
loosened.
Make sure that the n is
completely engaged into
the sprocket.
The set screw is located in
the housing at the base of
the n.

Hobie iTrek Specifications

General

Type	Inflatable Kayak
Width	36 inches
Material	PVC
Hull Material	PVC
Seat Type	Inflatable
Storage	Bow storage