Hobie iTrek User Manual

24
Rudder Tuning
Maintenance and Care
Store out of Weather
or
WARNING: Do not store
in humidity, it can cause
damages to the
inatable. Heat and direct
sunlight can raise pressure
over the ination limit.
Store your kayak in the
rolling bag or inated in
a cool, dry environment
out of the elements.
1
2
3
Align the steering handle
straight.
Tip: Fully tighten the screw
under the steering handle to
keep the handle from turning
during the adjustment.
Starting with the left or right
side, feed the cable under
the screw head on the rudder
drum. Pull the cable so there
is no slack until the cable is
taught. Tighten the screw to
lock the cable.
Repeat for opposite side.
Loosen the screw under the
steering handle 1/4 turn.
Loosen the left and right
screws so the steering cables
are free to move
Loosen R screwLoosen L screw
Pull cable
& tighten
screw
Pull cable
& tighten
screw
Align rudder pointing straight
Align steering handle pointing straight
1 2

Hobie iTrek Specifications

General

Type	Inflatable Kayak
Width	36 inches
Material	PVC
Hull Material	PVC
Seat Type	Inflatable
Storage	Bow storage