Hobie iTrek User Manual

15
hobie.com
On the Water
Rudder
Align the track on the
rudder system with
the track on the
gudgeon that is
mounted to the back
of the kayak.
Slide the rudder track
into the gudgeon
track.
To remove the rudder
pull the red locking
knob out while pulling
the rudder up.
1
2
3
Your rudder pin is designed to break
under high loads. An extra pin is
stored inside the pocket on your
seatback.

Hobie iTrek Specifications

General

Type	Inflatable Kayak
Width	36 inches
Material	PVC
Hull Material	PVC
Seat Type	Inflatable
Storage	Bow storage