Hobie Mirage Compass Instruction Manual

4
Installation
Untie one end of the line from the nylon ring and
feed the line through the blocks so the ring and
shock cord assembly is on the bottom. Re-tie the
end of the line to the ring using an arbor knot so
there is tension holding the line against the hull.
Trim the excess line, heating the ends to prevent
fraying.
3

Hobie Mirage Compass Specifications

General

Fitted Hull Weight	68 lbs / 31 kg
Capacity	400 lbs / 181 kg
Hull Construction	Rotomolded Polyethylene
Seat	Vantage CT
Length	12 ft / 3.66 m
Width	34 in / 0.86 m
Storage	Front Hatch, Rear Cargo Area
Vantage Seat Capacity	275 lbs / 125 kg