Hobie Mirage Outback User Manual

27
hobie.com
Fishfinder Option
3
Remove the 3-way plug in the cockpit. Lead the cable through
the inside of the kayak and exit the cable out through the hole
for the 3-way plug in the cockpit.
4
Using the same plug, install the power cable.
There are plugs for the wire to exit the hull on either side of
the kayak to accommodate a right or left sided screen
location. Some plugs are located in cup holder or mesh
pockets.
1.

Hobie Mirage Outback Specifications

General

Drive System	MirageDrive 180 with Kick-Up Fins
Hull Construction	Rotomolded Polyethylene
Capacity	1 person
MirageDrive	MirageDrive 180 with Kick-Up Fins
Rod Holders	4
Width	34" / 0.86 m
Weight Capacity	425 lbs