Attachments C250 ... C370
146 Translation of Original Operating Manual 156319-04
If the minimum rear ballasting (G
H
) is not reached with the rear attachment (G
H min
), the weight of the
rear attachment must be increased to the weight of the minimum rear ballasting!
Enter the calculated actual total weight and that which is specified in the operating manual of the vehicle
into the table.
5) Calculation of the actual rear axle load T
H tat
Enter the calculated actual rear axle load T
H tat
and the permissible rear axle load specified in the operating
manual of the vehicle into the table.
6) Tyre load capacity
Enter twice the value (two tyres) of the actual tyre load capacity (see e.g. tyre manufacturer's documents)
into the table.
To Next Page
Loading...
