Need help?Do you have a question about the Holley Quadrajet Sniper EFI and is the answer not in the manual?
Lists essential tools needed for the installation process.
Step-by-step instructions for mounting the throttle body.
Proper techniques for assembling fuel hoses and fittings.
Essential guidelines for clean power, ground sources, and wire routing.
Explains how to connect loose wires for power, ignition, and fuel pump.
Steps to connect the 3.5" Touch Screen LCD display to the main harness.
Connects to the coil negative for RPM input without ECU timing control.
Connects to aftermarket CD ignition box tach output for RPM signal.
Pre-installation requirements and overview for MSD distributors.
Steps to remove the distributor from the engine.
Explains different options for adjusting data on graph screens.
How to adjust Target AFR and Acceleration Enrichment parameters.
Settings for fuel prime and enabling/disabling closed loop operation.
Controls for self-tuning (Learn) and basic idle speed adjustment.
Adjusting ignition timing for idle, cruise, and wide open throttle.
Configuration of fan on/off temperatures and AC shutdown.
Setting engine parameters like cylinders, displacement, and system type.
Configuring ignition type, rev limiters, and static timing.
Adjustments for coolant enrichment, acceleration fuel, cranking, and afterstart fuel.
Configuration options for closed loop operation and sensor input.
Adjusting learning functions and idle air control (IAC) parameters.
Configuring IAC motor speed and startup behavior.
Features for idle spark assist and launch control (2-step, retard).
Customizing gauge scales and warning thresholds for data channels.
Personalizing the display by configuring custom dash screens.
General| Brand | Holley |
|---|---|
| Model | Quadrajet Sniper EFI |
| Category | Automobile Accessories |
| Language | English |
To Next Page
