Holman BX2 - BX2 Tap Timer Features; Setup; Connecting to Igardener

4 of 20 5 of 20
BX2 Tap Timer Features
1. Automatic watering: Easily done through the iGardener
®
app
2. Manual watering: Select a ZONE to run on the MAIN DIAL
and START/STOP by pressing the TAP TIMER BUTTON
L IP54 dust and water
protection rating
L Zones: 2
L No. of starts per program: 3
L Watering schedules:
7-day, interval, odd,
even, cycle
L Permanent memory: no
L Power source: 4×1.5vAA
alkaline batteries
L Housing: outdoor
L Electrician required: no
L 50-800 kPa
workingpressure
L 3°C-50°C ambient
working temperature
Á For use with cold
water only
L Maximum flow rate 25 L/min
Connecting to iGardener
®
1. Download iGardener
®
to your mobile device
via the App Store
or  Google Play
® Visit our website for more
www.holmanindustries.com.au
/iGardener/
2. Install 4× 1.5v AA alkaline
batteries into the battery
compartment [a] of the
BX2 Tap Timer, with the
contacts pointing towards
the front of the tap timer
3. Ensure Bluetooth
®
is active
on your smartphone
® Your BX2 may not be
visible as a device in your
Bluetooth
®
list–this is normal
4. Open iGardener
®
on
your mobile device and
select BXWATERING [b]
from the main menu
® On Android  devices,
you may be prompted to
allow location access–
this is required for
iGardener
®
to access
Bluetooth
®
functions
Overview Setup
a
b
Please read these instructions in full before proceeding with setup. iOS is a trademark
of Apple Inc. Android is a trademark of Google LLC. The Android robot is reproduced
or modified from work created and shared by Google and used according to terms
described in the Creative Commons 3.0 Attribution License. All other content is
Copyright©HolmanIndustries2021
Take full control of your garden watering and lighting with a Bluetooth®
connection and a tap of your iPhone or Android, with the iGardener™
smartphone app!