Introduction 1
Glossary 2
Key Features 3
Programming Instructions
Introduction 4
Set automatic program 4
Programming example 5
Spare watering planner 6
General tips for easy programming 7
Programming
Set current time & correct day 8
Set calendar 8
Set start times 9
Set watering days 10-11
Set station run times 11-12
Manual Operations
Run a single station 13
Run a system test 13-14
Run a program 14-15
Stop watering 16
Stacking start times 16
Automatic back up 16
Other Features
Rain sensor 17
Rain delay 18
STOP all watering 18
Water budgeting & seasonal
adjustment
19
Special Functions
Pump ON/OFF selection 20-22
Pressure build 22-23
Water hammer saver 23
Looping Program 24-25
Installation Instructions
Mounting the controller 26
Electrical hook-up 26
Field wiring connections 26-27
Terminal block layout 27-28
Pump Start Relay Connection 28-29
Single phase pump installation 29
Master valve installation 29
(including rain sensor )
Station (valve) installation 30
Pump protection (system test) 31
Fault Finding Guide 32-33
Electrical Characteristics 34
Electrical outputs 34
Servicing the controller 35
Spare watering planner 36-39
Guarantee
CONTENTS
To Next Page
Loading...
