HOLMS 300
© HOLMS INDUSTRI AB, ALL RIGHTS RESERVED 141204. 11
Product Description
The Holms 300 is a front-mounted, pick-up sweeper for
loaders, tractors, etc. The roller is driven by two direct-
acting hydraulic motors which are available in two sizes,
2000 (195 cm
3
) and 4000 (311 cm
3
). The motors are
intended for a flow of between 40 and 130 litres/min and
between 70 and 210 litres/min, respectively.
The Holms 300 is manufactured in various widths
between 2 and 3 metres. The refuse container has an
effective refuse volume of 360-700 litres, depending on
the width chosen.
The suspension of the sweeper brush ensures a constant
and uniformly distributed contact pressure to the surface.
This ensures minimum brush wear and makes the roller
less susceptible to irregularities, tram tracks and kerbs, etc.
Standard model
In the standard model the Holms 300 is fitted with a
400 litre water tank and an electric water pump. The
machine’s attachment hooks are of the screw type, which
enables lateral displacement and also simplifies
switching between different carriers.
To Next Page
Loading...
