22
Cleaning Instructions
This section provides instructions on how to clean the capital components of the ATEC Sapphire unit.
WARNING: Single patient use disposable items are not intended for reuse and should not be cleaned or
resterilized.
ATEC Breast Biopsy and Excision System: Sapphire Unit
WARNING: Console must be disconnected from electrical power source prior to cleaning. Failure to do so may
cause electric shock and death. To clean the ATEC Sapphire unit console, disconnect the console from electrical
power source. Periodically clean the console using a soft, damp cloth and mild detergent. Wipe dry.
WARNING: Do not immerse console in water. Immersion in water will cause console damage and may cause
electric shock or death.
ATEC Footswitch
Clean the ATEC Footswitch thoroughly with mild detergent and wipe dry.
WARNING: Do not immerse the footswitch in water. Immersion in water may cause damage to the footswitch.
Owner’s Record
ATEC Breast Biopsy and Excision System: Sapphire Unit
The serial number of your ATEC Breast Biopsy and Excision System: Sapphire unit is located on the panel on the left side
of the console. Record this number in the space provided below. Refer to this serial number whenever you contact Hologic
Customer Support or your distributor regarding your ATEC Sapphire unit.
Model Number: ATEC Sapphire
Serial Number: _______________________
To Next Page
Loading...
