Need help?Do you have a question about the Hologic DISCOVERY Wi and is the answer not in the manual?
Details the technical specifications of the Discovery system, including scanning methods and X-ray system parameters.
Outlines the necessary tools and documentation required for the Discovery system installation.
Guides on inspecting for shipping damage, uncrating the unit, and moving it to its final location.
Covers the installation process, including cabling and checking power line voltage.
Covers essential calibration and testing procedures to ensure the system operates correctly.
Covers adjusting the A/D gain potentiometer to ensure consistent detector input regardless of X-ray flux variations.
Details the procedure to check table alignment using a measuring tape and software verification.
Procedure for adjusting C-arm parallelism using a digital level, ensuring the arm is parallel to the tank.
Crucial procedure for aligning the X-ray beam with the detector array for optimal performance.
Locates and sets exact starting positions of each aperture (slit) in motor steps and centers each slit.
Guides on calibrating system motors (AY, AR, TY, TX, TZ) using the SQDRIVER program for accurate motion limits.
Covers adjusting the A/D gain potentiometer to ensure consistent detector input regardless of X-ray flux variations.
Covers the three-stage calibration process for Area, BMD, and BMC measurements.
Provides troubleshooting steps for issues related to power supply, dead systems, or circuit breakers.
Offers troubleshooting suggestions for failures related to table and C-arm movement, including checking the error log.
Lists common X-ray related problems and suggested solutions, referring to functional descriptions.
Addresses issues where the X-ray beam is not properly aligned, affecting repeatability.
Lists procedures for trained service personnel, including archives, backups, database checks, and alignment tests.
Describes the X-Ray Survey utility for testing X-ray generation and detection functions.
Describes the SQDRIVER program used for motor calibration and troubleshooting motor movement problems.
Explains SQVERIFY as a diagnostic program for low-level system component tests.
Provides a comprehensive list of system error messages, their causes, and suggested actions or troubleshooting steps.
General| Brand | Hologic |
|---|---|
| Model | DISCOVERY Wi |
| Category | Medical Equipment |
| Language | English |
To Next Page