Hologic SecurView DX User Manual

SecurView DX Workstation
Quality Control Manual
MAN-09466 Revision 001

Hologic SecurView DX Specifications

General

Display	LCD
Display Resolution	2048 x 2560 pixels
Luminance	1000 cd/m²
Color Depth	10-bit
Application	Breast Imaging
Viewing Angle	170°
Compatibility	DICOM compliant
Input Ports	DVI-D, DisplayPort
Integration	PACS, RIS

Summary

Chapter 1 Introduction

1.1 Descriptions of Warnings, Cautions, and Notes

Explains the meaning of WARNING!, Warning, Caution, and Note symbols used in the manual.

1.2 Safety

Emphasizes adherence to electrical, mechanical, and radiation safety standards, including ESD precautions.

1.3 Product Complaints

Outlines the procedure for reporting dissatisfaction or issues with the product to Hologic.

1.4 Terms and Definitions

Defines key terms and acronyms used in the manual, such as DICOM, GSDF, LCD, MQSA, QA, QC, and USB.

Chapter 2 QC Activities for the Medical Physicist

2.1 QC Procedures for the Medical Physicist

Details the annual QC check procedures for Medical Physicists using QAWeb software.

2.2 Corrective Action

Provides steps to take when display performance criteria are not met, including recalibration and engineer involvement.

2.3 Reading Room Configuration Testing

Describes the testing performed by a Medical Physicist for initial reading room setup and annual checks.

Chapter 3 QC Activities for the Radiologic Technologist

3.1 QC Procedures for the Radiologic Technologist

Outlines weekly QC checks and semi-annual calibration procedures for Radiologic Technologists using QAWeb.

3.2 Corrective Action

Explains actions to take if displays do not meet performance criteria, including recalibration and seeking engineer help.

Chapter 4 Testing the Displays

4.1 Photometer Styles – Built-in vs. External

Differentiates between displays with built-in photometers and those requiring external ones for QC.

4.2 Testing with Built-in Photometer Sensor Displays

Details how to verify tests run successfully for displays with built-in photometers.

4.3 Testing External Photometer Sensor Displays

Explains how to run QC tests using an external photometer for specific display models, including sensor reconnection and felt pad attachment.

4.4 Testing Barco Display Performance using QAWeb Enterprise

Describes how QAWeb Enterprise automatically runs tests for compatible displays and how to verify results.

4.5 Testing Barco Display Performance using MediCal QAWeb

Explains how to use MediCal QAWeb to run Hologic Compliance Tests and view results for specific displays.

Chapter 5 Manually Calibrating Displays

5.1 Manually Calibrating Displays using QAWeb Enterprise

Details steps to access the Windows desktop to run manual calibration via QAWeb Enterprise.

5.2 Manually Calibrating Displays using MediCal QAWeb

Outlines the process for manually calibrating displays using MediCal QAWeb.

Chapter 6 Additional MediCal QAWeb Procedures

6.1 Saving the MediCal QAWeb Action History

Provides instructions on saving the MediCal QAWeb Action History to a USB drive for compliance records.

6.2 Scheduling the MediCal QAWeb Hologic Compliance Test

Explains how to modify the schedule for the automatic Hologic Compliance Test.

Appendix A SecurView Annual QC Form for Medical Physicists

Table 2: Annual QC Form for Medical Physicists

Provides the template for recording annual QC data for Medical Physicists.

Table 3: Performance Criteria

Lists the performance criteria and tolerances for various Barco displays.

Appendix B SecurView Weekly QC Form for Radiologic Technologists

Table 4: Weekly QC Form for Radiologic Technologists

Provides the template for recording weekly QC data for Radiologic Technologists.