SecurView DX Workstation V12.0 Quality Control Manual
Chapter 6: Additional MediCal QAWeb Procedures
MAN-09466 Revision 001 Page 37
6: Additional MediCal QAWeb Procedures
6.1 Saving the MediCal QAWeb Action History
Caution:
Connecting a QAWeb agent to a QAWeb server may overwrite the required Hologic
Policy Map. When connecting to a QAWeb server, contact Technical Support at
+1.800.760.8342 to obtain the correct version of QAWeb that will maintain the
required Hologic Policy Map.
Hologic strongly recommends saving the MediCal QAWeb Action History monthly to
prevent data loss in the event of a system failure. Hologic also recommends saving the
Action History prior to a SecurView upgrade.
Printing the Action History provides a hardcopy record of all of the actions run on the
SecurView workstation during a given month. Hologic recommends retaining the
printed Action History as proof of compliance. Use the following procedure to save the
Action History to a USB drive and then transfer it to a different computer for printing.
1. Log out of the SecurView DX application.
2. Insert a USB drive into the SecurView workstation.
3. To start MediCal QAWeb, press the Windows
key, then select Menu > Barco >
MediCal QAWeb Agent.
4. The MediCal QAWeb Agent window opens. Select the Status icon.
5. The Workstation > Status window opens. In the ‘Action History’ section, select the
View the history of all actions on this workstation link. The Action History window
opens. This window displays all of the actions run on the workstation during one
month.
To Next Page
Loading...
