TruNode
®
Gamma Probe System User Manual
8.
SPECIFICATIONS
TruNode®
S-10 Probe
Overall Dimensions: 17mm X 226mm
Reach: 103mm, Operative Diameter: 10mm
Weight: 70g
Wireless: Bluetooth
®
Smart
Integrated Tungsten Collimator
External Materials: Stainless Steel, Tungsten, Silicone Rubber
Shielding Efficiency: >99.9%
Energy Resolution: 10% FWHM (Tc-99m)
Selectable Energy Windows: Tc-99 ‘Point’ Mode, Tc-99 ‘Scan’ Mode, I-125
‘Seed’ Mode
Angular Resolution in Air: 46 degrees FWHM
Spatial Resolution @1cm in Air, Point Mode: 13mm FWHM
Spatial Resolution @1cm in Air, Scan Mode: 14mm FWHM
Sensitivity in Air, Point Mode: 18,000CPS/MBq max; 3,400 /MBq @1cm
Sensitivity in Air, Scan Mode: 27,000CPS/MBq max; 4,800CPS/MBq @1cm
Probe-Mounted Controls:
Activate & Connect to UFU
Mode (Hi-Sensitivity ‘Scan’, Hi-Resolution ‘Point’, I-125 ‘Seed’),
Count Rate Reporting,
Count Rate Averaging,
Audio Feedback Scaling,
Volume and Mute.
Probe Life: Lesser of 100-min continuous use, or 4-hr intermittent use, or 1-procedure
Use Condition Limitation: 15 to 37°C
Storage & Transit Condition Limitation: -15 to 50°C
TruNode®
T-10 User Feedback Unit
Overall Dimensions: 25cm x 18cm x 2.3/13cm (without/with clamp)
Weight 1.4kg (with clamp)
Android operating system Maintenance free, no calibration
Power Supply: 100-240VAC, 56/60Hz input; 1A, 5VDC output
Storage & Transit Condition Limitation: -15 to 50°C
To Next Page
Loading...
