Holux M-241 Quick Guide

Connecting the device to PC
Using USB Cable
5
1. Power On the device.
2. Connect the device to a computer
with the USB cable provided in the
package.
3. Install the USB driver
“CP210x_VCP_Win2K_XP.exe ”
from the CD provided in the
package.
4. Click <Start> menu, select →
<Setting>, then enter→
<Controller> and select <System>
Select <Device Manager> Find the
< Connector (COM & LPT)> and
check the “CP210xUSB to UART
Bridge Controller” message.
Please note that the virtual COM port
number might be different on every
com
p
uter. Before usin
g
navi
g
ation
COM Port
Using Bluetooth
Power On the device, and connect the device to a Host with the
Bluetooth interface.

Holux M-241 Specifications

General

Brand	Holux
Model	M-241
Category	GPS
Language	English