-13-
② Place the drone on a flat and
level surface, with its head facing
forward and its tail pointing
towards the pilot.
All of the following operations in this manual use MODE 2.
PRE-FLIGHT PREPARATIONS
PAIRING
③ Turn on the transmitter.
④ Push the left joystick up, then
down, to pair the drone with the
transmitter. The indicator lights on
the drone will turn solid if the
drone is paired successfully.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
HEAD
TAIL
① Slide the Power Switch button
to the right to turn on the drone.
This drone has two operating modes, the FLIGHT mode and
the LAND mode.
To Next Page
Loading...
