HOMAG CUBE - 2 Functions; Sequences

HOMAG CUBE
Smart device 4.6.2
3 / 249082462090 _ 100210512 _ 82 _ ENU _ 00
2 Functions / sequences
The HOMAG CUBE is used in various
assistance systems. For example:
Cutting Production Set
The cutting assistant provides support when
cutting with the saw and labeling parts.
Sorting Production Set
Each part has its place. The assistant helps
with the sorting of parts in the workshop
Edgeband Management Set
This edge assistant organizes all edge
material in the workshop.
For the individual applications, e.g. control of
LED strips 1.1 or a label printer for identifying
workpieces and edge material 1.2, one
HOMAG CUBE with the associated
components is required in each case.
The corresponding APP from HOMAG can be
downloaded from Google Play Store or
Appstore. The app is needed to control the
CUBE.
 See the chapter entitled "Commissioning"
You can also find more information in the
APP.
The HOMAG CUBE must be supplied with
power using the power supply unit provided.
 See the chapter entitled "CUBE power
supply"
The CUBE can be connected to the network
and to the device to be connected, e.g. an
LED box, via the two Ethernet interfaces.
There is also a status display on the HOMAG
CUBE. The meaning of the individual colors
and flash codes are listed in the "Meaning of
status display" table.
1.1 LED strip control
1.2 Printer control