Page 13 HP-4960-1TB: v1.0
4. Set the other channel alarm parameters following
steps 2 and 3.
NB: Video Loss & Video Blind setup method is similar
to Motion Detect.
11. PTZ Control
1. Select 【Main Menu】>【System】>【PTZ Config】
and set basic parameters such as channel and
protocol.
2. Right Click the mouse, choose “PTZ Control” and
manually control the PTZ camera. Use the mouse
to manually control the PTZ direction. Use the
mouse wheel to zoom in/out with the selected
camera.
To Previous Page
Loading...