Page 7 HP-4960-1TB: v1.0
【Prerecord】Record 1-30 seconds before the
action. (file length is determined by the code
stream)
【Mode】Set record mode: schedule, manual or stop.
Schedule ： Record according to the set video mode
(regular, detect and alarm) and time selection.
Manual：Click the “all” button and set the corresponding
channel recording no matter it is in any state.
Stop：Click the “stop” button and set the corresponding
channel to stop recording no matter it is in any state.
【Period】Set the time section of common recording, The
recording will start only in the set range.
【Recording Type】Set recording type: regular, detection
or alarm.
Regular：Perform the regular recording in the set time
section. The video file type is “R”.
Detect：Trigger the “motion detect”, “camera mask” or
“video loss” signal. When above alarm is set as opening
recording, the “detection recording” state is on. The video
file type is “M”.
To Next Page
