SYMBOLS
Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning.
Proper interpretation of these symbols will allow you to operate the tool better and safer.
NAME EXPLANATION
Safety Alert Symbol Indicates danger, warning or caution. It means attention!!! Your safety is
involved.
Read Your Operator's Your manual contains special messages to bring attention to potential
Manual safety concerns as well as operating and servicing information. Please
read all the information carefully to ensure satisfaction and safe use.
Wear eye and hearing Wear eye and hearing protection when operating this equipment.
protection
Keep bystanders away Keep all bystanders at least 15 m away.
Ricochet Danger of Ricochet.
Blade Do not install any type of blade on this unit.
No Smoking Do not smoke when mixing fuel or filling fuel tank.
Petrol Use unleaded gasoline intended for motor vehicle use with an octane
rating of 87 ([R+M]/2) or higher.
Oil Use synthetic 2-stroke oil.
Mix Petrol and Oil Mix the fuel mix thoroughly and also each time before refuelling.
Switch On/Off Switch
I = ON to Run
O = OFF to Stop
Fully press and release the prime bulb 4 times.
11
English
To Next Page
Loading...
Need help?
General
