Honda 08E91-E22-101B - Page 11

© 2010 American Honda Motor Co., Inc. – All Rights Reserved. AII 44367 (1008) 11 of 28
32. Using isopropyl alcohol on a shop towel, thoroughly
clean the area where the urethane tape will attach.
Cut the urethane tape remaining from step 27 as
shown. Secure the antenna cable to the vehicle
panel with the piece of urethane tape. Be careful not
to crease the headliner.
33. Using isopropyl alcohol on a shop towel, thoroughly
clean the area where the urethane tape will attach.
Secure the antenna cable to the vehicle panel with
one urethane tape. Be careful not to crease the
headliner.
932004AD
URETHANE TAPE
Remaining tape from
step 27.
VEHICLE
PANEL
URETHANE TAPE
ANTENNA
CABLE
ANTENNA
URETHANE TAPE
ANTENNA
CABLE
932005AD
ANTENNA
CABLE
ANTENNA
URETHANE
TAPE
VEHICLE
PANEL
34. Route the antenna cable along the left A-pillar and
secure it to the vehicle harness with five wire ties as
shown.
35. Pull away the weatherstrip.
36. Route the antenna cable down under the dashboard.
Tuck the antenna cable between the left A-pillar and
the dashboard, then reinstall the weatherstrip.
720905AK
LEFT
A-PILLAR
ANTENNA
CABLE
5 WIRE
TIES
VEHICLE
HARNESS
VEHICLE CLIP
751650AK
LEFT
A-PILLAR
ANTENNA
CABLE
DASHBOARD
WEATHERSTRIP
Pull away.