Honda 08E91-E22-101B - Page 21

© 2010 American Honda Motor Co., Inc. – All Rights Reserved. AII 44367 (1008) 21 of 28
95. Route the hood switch harness. Secure the hood
switch harness to the vehicle panel with the three
clips installed on the hood switch harness.
96. Attach the cable clip to the hood switch harness at
the green tape, and secure it to the vehicle panel.
97. Remove the vehicle grommet. Route the hood
switch harness 2-pin connector into the interior
compartment.
6311122Y
FRONT
3 HOOD SWITCH
HARNESS CLIPS
VEHICLE
PANEL
HOOD SWITCH
HARNESS
CABLE
CLIP
GREEN
TAPE
6311113Y
INSIDE
OUTSIDE
HOOD
SWITCH
HARNESS
VEHICLE
GROMMET
(Discard.)
FRONT
GROMMET
Install the grommet.
98. Route the hood switch harness along the vehicle
harness to the center of the vehicle. Secure the hood
switch harness to the vehicle harness with six wire
ties.
99. Plug the hood lock 2-pin connector to the hood
switch harness 2-pin connector and secure the
connector to the vehicle panel.
FRONT
6 WIRE TIES
VEHICLE
HARNESS
GREEN
TAPE
6311150Y
HOOD SWITCH HARNESS
2-PIN CONNECTOR
HOOD LOCK
2-PIN
CONNECTOR
HOOD SWITCH
HARNESS
VEHICLE
PANEL