63
TAKING CARE OF UNEXPECTED PROBLEMS
When cranking the engine with an
open ignition circuit (spark plug
removed from the ignition circuit),
remove the emergency stop switch
clip from the emergency stop switch
to prevent possible damage to the
ignition system.
5. Pour a teaspoon of engine oil into
the sp
ark plug hole, and then pull
the starter grip several times to
lubricate the inside of the cylinder.
6. Reinstall the spark plug, and put
the
emergency stop switch clip
into the emergency stop switch.
7. Attempt to start the engine.
If the engine fails to start, remove
the sp
ark plug, and dry it, then
reinstall the spark plug and attempt
to start the engine again.
If the engine starts, and no
mechanic
al damage is evident,
continue to run the engine for a
half hour or longer.
8. As soon as possible, take the
outboard motor to an authorized
Honda Marine dealer for
inspection
and service.
31ZW66320.book 63 ページ ２０１３年１０月４日 金曜日 午後３時４８分
To Next Page
Loading...
