Name: Honda BF40
Brand: Honda
Rating: 4 (1 reviews)

To Next Page

To Previous Page

To “Conguring the settings” (P.8)

(5) Tilt Limit Set

You can set the tilt limit position (tilt upper limit position).

Perform trim zero set in advance. (P.20)

• Under the following conditions, Tilt Limit Set is grayed out

and cannot be congured.

– When the engine is running

– When the trim tilt angle sensor is defective

– When the outboard motor angle is within the trim area

– When DLC (dealer's tool) is connected

1. Press the POWER TRIM/TILT SWITCH to set the outboard

motor angle to a position within the tilt area.

2. Use the [

∧

] or [

∨

] button to select BOAT SET and press the

[ENTER] button.

3. Use the [

∧

] or [

∨

] button to select Tilt/Trim Preset and

press the [ENTER] button.

4. Use the [

∧

] or [

∨

] button to select Tilt Limit Set and press

the [ENTER] button.

5. Press the POWER TRIM/TILT SWITCH to raise the outboard

motor to your desired tilt position and press the [ENTER]

button.

• When the Tilt Limit Set setting is successfully completed,

the COMPLETE pop-up window appears.

• If the Tilt Limit Set setting is not completed, the FAILED

pop-up window appears. Retry setting from step 4.

• When the setting is completed, is displayed next to Tilt

Limit Set.

Questions and Answers:

Need help?

Do you have a question about the Honda BF40 and is the answer not in the manual?

Honda BF40 Specifications

General