Name: Honda BF40
Brand: Honda
Rating: 4 (1 reviews)

To Next Page

To Previous Page

To “Conguring the settings” (P.8)

(8) Trim Limit Reset

You can reset the trim limit position (trim lower limit position).

• Under the following conditions, Trim Limit Reset is grayed

out and cannot be congured.

– When the engine is running

– When the trim tilt angle sensor is defective

– When DLC (dealer's tool) is connected

1. Use the [

∧

] or [

∨

] button to select BOAT SET and press the

[ENTER] button.

2. Use the [

∧

] or [

∨

] button to select Tilt/Trim Preset and

press the [ENTER] button.

3. Use the [

∧

] or [

∨

] button to select Trim Limit Reset and

press the [ENTER] button.

4. Press the [ENTER] button.

• When the Trim Limit Reset setting is successfully

completed, the COMPLETE pop-up window appears.

• If the Trim Limit Reset setting is not completed, the

FAILED pop-up window appears. Retry setting from step 3.

• When the reset is completed, is displayed next to Trim

Limit Reset.

Questions and Answers:

Need help?

Do you have a question about the Honda BF40 and is the answer not in the manual?

Honda BF40 Specifications

General