Honda CB550 - Servicing with Engine Mounted in Frame; Engine Removal

20
4 ENGINE
1. SERVICING WITH ENGINE MOUNTED IN FRAME
Items
Pages
-
--
1.
Cylinder Head Cover and Camshaft
24
2.
Cylinder Head
24
3.
Cylinder and Piston
24
4.
Cam Chain Tensioner
25
5.
Oil Filter and Oil Pump
36
6.
Clutch
40
7.
Gear Shift Mechanism
43
8.
Electrical System i.e., (Generator and Starting motor)
95
2. ENGINE REMOVAL AND INSTAL-
LATION
A. Removal
1. Turn the fuel cock to the "STOP" posi-
tion, disconnect the fuel pipe at the tank,
and dismount the fuel tank.
2. Unscrew the oil drain bolt and the oil
filter center bolt, and drain the engine
oil.
3. Remove the exhaust pipe and the muffler.
4. Disconnect the high tension cords at the
spark plugs.
5. Disconnect the ground cable at the battery
terminal.
6. Unscrew the 5 mm screw and disconnect
the tachometer cable at the cylinder head
cover.
7. Open the seat, take out the air cleaner
element, unscrew three 6 mm bolts and
remove the air cleaner case.
Fig. 44 Q) Tachometer cable @ 5mm screw
Fig . 43 1 Drain bolt 2 Oil filter center bolt
Fig. 45 Q) Air cleaner element @ Air cleaner
@ 6 mm bolts case
Next Page
Contents
Prev Page