Honda CRF50F 2004-2015 - Page 117

Install the drive gear outer and clutch center.
Install the following:
- Clutch plate A
- Free
springs
- Clutch disc A
- Clutch disc B
- Clutch disc A
-
Clutch plate B
• Install the clutch disc A with its flat surface facing
the clutch disc B .
• Install the clutch plate B with its chamfered side
facing the clutch disc A.
Install the cl utch set ring with its chamfered side
facing the clutch plate 8.
DRIVE
SET
CLUTCH/GEARSHIFT LINKAGE
OUTER
SPRINGS
A
-, DISCB
PLATE B
9-13